1 |
ToleranceA state in which a T cell can no longer respond to antigen. The T cell "tolerates" the antigen. Also called immune tolerance.
|
2 |
ToleranceSee: Immune tolerance.
|
3 |
ToleranceUsually meant as a liberal attitude toward those whose race, religion, nationality, etc. is different from one’s own. Since it has the connotation of ‘put up with’, today the term acceptance is prefer [..]
|
4 |
Tolerance A situation that occurs with continued use of a drug in which an individual requires greater dosages to achieve the same effect.
|
5 |
ToleranceThe maximum and minimum limit values a product can have and still meet customer requirements.
|
6 |
ToleranceIn computing stepwise regression, the tolerance of a regressor variable is the proportion of its sum of squares about the mean not accounted for by other variables already included in the regression e [..]
|
7 |
Toleranceearly 15c., "endurance, fortitude" (in the face of pain, hardship, etc.), from Old French tolerance (14c.), from Latin tolerantia "a bearing, supporting, endurance," from tolerans, [..]
|
8 |
ToleranceA condition in which higher doses of a drug are required to produce the same effect achieved during initial use; often associated with physical dependence.
|
9 |
ToleranceA condition characterized by a reduced effect of a drug upon repeated administration. In some cases, it may be necessary to increase the dose of the drug to attain the same effect, or the original lev [..]
|
10 |
Tolerancefair and respectful attitude toward others and their way of life.
|
11 |
ToleranceThe permitted cost and time scale limits set by the executive committee for the project or set by the project board. Editor's Note: Also used as a technical term to specify acceptable limits of a [..]
|
12 |
ToleranceAllowable deviation from a specified value.…
|
13 |
Toleranceexamined close up, the term seems to mean "ability to put up with things that are harsh." The range of an organism's ability to do this is referred to as its ecological amplitude
|
14 |
Tolerancethe power or capacity of an organism to tolerate unfavorable environmental conditions permissiveness: a disposition to allow freedom of choice and behavior the act of tolerating something willingness [..]
|
15 |
ToleranceInherent lack of susceptibility to a pesticide. Also, the ability of a plant to grow in spite of infection by a pathogen.
|
16 |
Tolerancen. Forbearance in judging of the acts or opinions of others.
|
17 |
ToleranceThe permissible range of variation of some characteristic from its nominal value.
|
18 |
ToleranceDecreased sensitivity to the effects of a substance such as a medication.
|
19 |
Tolerancenoun. 1. a condition, stemming from continual utilization of a drug, marked by a significant lessened impact with regular use of the same dosage of the drug or via a need to up the dosage significantl [..]
|
20 |
TolerancePermissible degree of variation from a pre-set standard.
|
21 |
ToleranceA permissible deviation from a project plan.
|
22 |
Tolerancetolerance (pop)
|
23 |
ToleranceAlthough there are a few different ways to define and use this term, in this case we are talking about tolerance as it relates to drugs. When you take medications or drugs your body begins to get used [..]
|
24 |
ToleranceA measure of the uncertainty arising from the physical and the environmental differences between members of differing equipment populations when failure rate data is aggregated to produce a final gene [..]
|
25 |
ToleranceThe range of variation permitted in maintaining a specific dimension or specification.
|
26 |
ToleranceThe permissible deviation of a dimension from the nominal or desired value. Minimum clearance between mating parts.
|
27 |
ToleranceDimensional allowance made for the inability of men and machines to fabricate a product of exact dimensions.
|
28 |
Tolerancethe diiference in measurements between body measurments and garment measurements.
|
29 |
ToleranceA condition in which, with repeated exposure to a drug, an individual becomes less responsive to a constant dose. Compare sensitization (definition 2).
|
30 |
ToleranceThe decrease in a person’s reaction to a drug that may come with prolonged use of it – requiring an increase in dose to achieve the same effect.
|
31 |
ToleranceThe amount of error that is allowed in a value. It is usually expressed as a percent of nominal value, plus or minus so many units of measurement.
|
32 |
ToleranceA fractional allowance for variations from the specified standard weight, dimensions, etc., in construction.
|
33 |
Tolerance – Maximum allowable variation from agreed-upon or specified dimensions throughout the manufacturing or converting process. Transfer Tape
|
34 |
ToleranceA radius around a node or linear object used to search for drawing errors.
|
35 |
ToleranceThe minimum distance allowed between linear objects or nodes during drawing cleanup. If two linear objects or nodes are separated by a distance less than the tolerance, AutoCAD Map 3D corrects the err [..]
|
36 |
Tolerance An unwanted but acceptable deviation from a given dimension. Tolerances indicate the allowable difference between a physical feature and its intended design. turning
|
37 |
ToleranceThe maximum permissible deviation from a specified alignment position, defining the limits of offset and angularity.
|
38 |
TolerancePermitted deviation between the declared value of a quantity and the measured value.
|
39 |
ToleranceThe allowable amount that the finished product can differ from the original designs in specific dimensions.
|
40 |
ToleranceThe permissible deviation from a specified value of a structural dimension, often expressed as a percent.
|
41 |
ToleranceDegree of precision obtainable with a measuring instrument.
|
42 |
ToleranceTolerance is the permissible residue level for pesticides in raw agricultural produce and processed foods. A tolerance has to be established whenever a pesticide is registered for use on a food or fee [..]
|
43 |
Tolerancewillingness to accept behaviour and beliefs which are different from your own, although you might not agree with or approve of them. Declaration of Principles on Tolerance (UNESCO 1995).
|
44 |
ToleranceDrinker's ability to endure the effects of alcohol without exhibiting signs of intoxication.
|
45 |
Tolerance(n) willingness to recognize and respect the beliefs or practices of others(n) the power or capacity of an organism to tolerate unfavorable environmental conditions(n) a disposition to allow freedom o [..]
|
46 |
ToleranceTolerance is the prevention of an immune response against a particular antigen. For instance, the immune system is generally tolerant of self-antigens, so it does not usually attack the body's ow [..]
|
47 |
ToleranceThe process through which the body becomes less responsive to a psychoactive substance or rewarding behavior. Over time, people who develop tolerance need larger doses to get the same effect they firs [..]
|
48 |
Tolerancein pharmacology, refers to the reduced responsiveness to a drug's action as the result of previous continued and/or multiple exposure
|
49 |
ToleranceThe allowable range on a dimension. If you want something 1.00″ thick, you have to specify how close to 1.00″ is acceptable, so you add a range like +/- .02. (Wikipedia)
|
50 |
TolerancePermitted deviation between the declared value of a quantity and the measured value.
|
51 |
ToleranceUndersteering occurs when the vehicle turns less sharply than would be indicated by the motion of the steering wheel.
|
52 |
ToleranceIt indicates the interval in which a certain operation is performed, compared to the theorical design value
|
53 |
Tolerance Used to describe the allowable variance in a measurement or a components value.
|
54 |
ToleranceThe relative capacity of a plant to become established and grow beneath overtopping vegetation.
|
55 |
TolerancePermissible variation in dimension, weight, tic. For example, some states allow a tolerance in their maximum truck weight limits.
|
56 |
ToleranceThe permissible deviation from a specified value of a structural dimension.
|
57 |
ToleranceDimensional allowance in the fabrication process.
|
58 |
Tolerance Alternative term for Resilience *** The Information Security Glossary ***
|
59 |
ToleranceAn acceptable variance from a specified measurement. Used to determine the minimum and maximum measurements.
|
60 |
ToleranceTolerance is the ability to experience exposure to potentially harmful amounts of a substance without showing an adverse effect. An adaptive state characterized by diminished responses to the same dos [..]
|
61 |
TolerancePermissible residue level for pesticides in raw agricultural produce and processed foods. Whenever a pesticide is registered for use on a food or feed crop, a tolerance must be established. EPA establ [..]
|
62 |
ToleranceThe condition when a drug user requires increasingly larger amounts of the drug to produce the same effect. A change in the system of the user, developing with prolonged or increased use of a drug. (Remember, alcohol is a drug.)
|
63 |
ToleranceThe mechanism, in central lymphoid organs (Thymus; Bone Marrow), that prevents immature Lymphocytes from reacting to Self-Antigens. This is accomplished by Clonal Anergy and Clonal Deletion.
|
64 |
ToleranceProgressive diminution of the susceptibility of a Human or Animal to the effects of a drug, resulting from its continued administration. It should be differentiated from Drug Resistance wherein an org [..]
|
65 |
ToleranceThe Exercise capacity of an individual as measured by endurance (maximal Exercise duration and/or maximal attained Work Load) during an Exercise Test.
|
66 |
ToleranceThe specific failure of a normally responsive individual to make an immune response to a known Antigen. It results from previous contact with the Antigen by an immunologically immature individual (Fet [..]
|
67 |
ToleranceThe mechanism, in peripheral lymphoid organs (Lymph Nodes; SPLEEN; Tonsils; and mucosal-associated Lymphoid Tissue), that prevents mature Lymphocytes from reacting to Self-Antigens. This is accomplish [..]
|
68 |
ToleranceThe ability of some Cells or Tissues to survive lethal doses of Ionizing Radiation. Tolerance depends on the species, Cell type, and physical and chemical variables, including Radiation-Protective Age [..]
|
69 |
ToleranceThe normal lack of the ability to produce an immunological response to autologous (self) Antigens. A breakdown of self tolerance leads to Autoimmune Diseases. The ability to recognize the difference b [..]
|
70 |
ToleranceAn induced state of non-reactivity to grafted Tissue from a donor organism that would ordinarily trigger a Cell-mediated or humoral immune response.
|
71 |
TolerancePhysiological or psychological effects of periods of Work which may be fixed or flexible such as flexitime, Work shifts, and rotating shifts.
|
72 |
ToleranceA tolerance is the measurable difference between the maximum and minimum permissible values for a component. In manufacturing, it defines a permissible deviation from the nominal dimensions that ensur [..]
|
73 |
ToleranceThe ability to tolerate a drug when given as prescribed. In other words, tolerance means benefiting from the drug without having any adverse effects that would make it impossible to continue taking the drug.
|
74 |
ToleranceVariation from a specified limit.
|
75 |
ToleranceFailure to mount an immune reaction on exposure to what would normally be an antigenic substance. [4]
|
76 |
Tolerancethe capacity of the body to become less responsive to a substance or a physiological insult. Tolerance to components of the self prevents or suppresses autoimmunity.
|
77 |
ToleranceAbility of the plant to endure the development of the parasite without showing marked symptoms of disease. see tolerant.
|
78 |
Tolerancethe loss of or decrease in the response to an agent, such as an allergen
|
79 |
ToleranceThe inherent ability of a species (turfgrass, weed, disease, insect, etc.) to withstand application of a pesticide (herbicide, fungicide, insecticide, etc.) at the normal dosage without being killed or injured. Specific tolerance may be associated with an anatomical or physiological characteristic in the plant or other organism.
|
80 |
ToleranceIf a person takes a particular drug (or medicine) over some time, the drug may gradually become less effective as their body may respond less to it. This is known as drug tolerance. If this happens, i [..]
|
81 |
ToleranceAn attenuation of response to an agent or antigen.
|
82 |
ToleranceThe specific degree of latitude for a control measure, which if exceeded, requires immediate corrective action. The tolerance is the difference between the target level and the critical limit. So if t [..]
|
83 |
ToleranceThe difference between the measured value and an Air Liquide or customer specified value, such as the requested concentration.
|
84 |
ToleranceThe difference between the measured value and an Air Liquide or customer specified value, such as the requested concentration.
|
85 |
ToleranceTolerance occurs when the body needs increasingly larger doses to get the same effect from a substance or a behavior. For example, someone might drink two drinks each night to feel good, but as time p [..]
|
86 |
ToleranceAllowable deviation from a nominal or specified dimension.
|
87 |
TolerancePermissible residue level for pesticides in raw agricultural produce and processed foods. Whenever a pesticide is registered for use on a food or feed crop, a tolerance must be established. EPA establ [..]
|
88 |
ToleranceWhat results from prolonged recent use of drugs requiring one to use more to get the same effect. "I've built up a tolerance to LSD, now I have to take at least 500 mikes to get off." A [..]
|
89 |
ToleranceTolerance is the range of pixels a tool in graphic software functions in. Or the range of shade or color pixels a Magic Wand selects, etc.
|
90 |
ToleranceThe maximum permissible error or variation from the standard in a measuring instrument. A maximum electrical or mechanical variation of specifications that can be tolerated without impairing the opera [..]
|
91 |
Toleranceacceptance and open‐mindedness to different practices, attitudes and cultures; does not necessarily connote agreement with the differences
|
92 |
ToleranceTolerance is the deviation allowed for a component ( for example, R,C,gm,Cgs,etc. ) of its measured output, such as voltage magnitude. For component variation, tolerance is the deviation of an element with respect to its nominal value.
|
93 |
ToleranceThe tolerance of a variable is defined as 1 minus the squared multiple correlation of this variable with all other independent variables in the regression equation. Therefore, the smaller the toleranc [..]
|
94 |
ToleranceIn ecotoxicology, this refers to a genetically based ability of organisms or species to not suffer toxicity when exposed to chemicals or other stressors.
|
95 |
ToleranceTolerance or toleration is the state of tolerating, or putting up with, conditionally.
|
96 |
ToleranceTolerance is an outdoor 2011 aluminum sculpture by Spanish artist Jaume Plensa, installed along Buffalo Bayou in Houston, Texas, in the United States. It consists of seven separate wire frame human fi [..]
|
<< Toko | Toll receptor >> |