1 |
CastingThe use of successive casts to reshape deformed or spastic limbs or contracted joints.
|
2 |
CastingExplicit conversion from one data type to another.
|
3 |
CastingAn uncocking of the wrists prematurely on the downswing, resulting in a loss of power and control. Also known as "hitting from the top." (Smith had a tendency to swing at and not through the ball, which caused him to cast the club from the top of the swing).
|
4 |
Castingc. 1300, "a throwing; late 14c., "a metal casting, a product of a cast;" verbal noun from cast (v.). Theatrical sense is from 1814. Casting couch in the naughty-Hollywood sense is from [..]
|
5 |
CastingThe formation of an empty, hollow crystal form of a dissolved mineral or mineral replaced by a pseudomorph with a hollow center of the original mineral.
|
6 |
Castingform that results from a liquid substance hardening in a shaped container.
|
7 |
CastingExplicit conversion from one data type to another.
|
8 |
Castingcast: object formed by a mold molding: the act of creating something by casting it in a mold the act of throwing a fishing line out over the water by means of a rod and reel the choice of actors to pl [..]
|
9 |
Casting An uncocking of the wrists prematurely on the downswing, resulting in a loss of power and control. Also known as "hitting from the top."
|
10 |
CastingIs when the wrist un-cock too quickly in the downswing resulting in a loss of angle.
|
11 |
Castingthe manufacturing process where molten metal is poured into preformed casts of the clubhead (see investment casting). See golf club design for more information.
|
12 |
CastingAn uncocking of the wrists prematurely on the downswing, resulting in a loss of power and control. Also known as "hitting from the top."
|
13 |
CastingAn uncocking of the wrists prematurely on the downswing, resulting in a loss of power and control. Also known as "hitting from the top."
|
14 |
CastingSee “Lost Wax Investment Casting”.
|
15 |
CastingSee Lost Wax Investment
|
16 |
CastingSwinging at the ball, rather than hitting through it, is described as hitting early from the top or 'casting', which results in a loss of control and ultimately power. Basically it happens w [..]
|
17 |
CastingAn uncocking of the wrists prematurely on the downswing, resulting in a loss of power and control. Also known as "hitting from the top."
|
18 |
CastingA process of producing a metal object by pouring molten metal into a mold.
|
19 |
CastingJensens Internet Dictionary (See Webcasting.)
|
20 |
Castingthe process of selecting and hiring actors to play the roles and characters in a film production, and be brought under contract; the lead roles are typically cast or selected by the director or a prod [..]
|
21 |
CastingThe act of forming an object, such as a bullet, by pouring molten material into a mold.
|
22 |
CastingThe forming of metal parts by pouring molten metal or other material into a mould. This is the cheapest way of making large quantities of parts that are of shapes that cannot be produced by stamping. [..]
|
23 |
CastingThe process of pouring molten metal into a mould so that the cooled, solid metal retains the shape of the mould.
|
24 |
CastingGenerally describes an unfinished item made of metal that is produced through pouring molten metal into a mold. A casting is later machined into a finished or semi-finished item. Also describes the pr [..]
|
25 |
Casting(i) The product of a foundry. Molten metal is poured into a mould to produce the desired finished shape, often complex. Castings are mostly made of iron, steel, aluminium, copper alloys and zinc, but most metals can be cast. They may be sand-cast, gravity die cast, pressure die cast or, more rarely, cast by the lost wax process. The structure of ca [..]
|
26 |
CastingThe process by which a material such as metal or plastic is poured into a mold while in a liquid state and then allowed to solidify, thereby taking the shape of the mold and creating a copy of the ori [..]
|
27 |
CastingThe process of turning liquid steel
|
28 |
CastingA part made by pouring molten metal into a mold.
|
29 |
CastingPouring molten metal into a mould to create a replica object
|
30 |
CastingShaping metal by pouring it onto or into a mold.
|
31 |
CastingProcess of pouring molten metal into a prepared mold cavity of a desired shape and allowing the metal to solidify.
|
32 |
Castingdeciding; decisive.
|
33 |
Casting(n) object formed by a mold(n) the act of creating something by casting it in a mold(n) the act of throwing a fishing line out over the water by means of a rod and reel(n) the choice of actors to play [..]
|
34 |
CastingConversion of a value from one type to another. Implicit casting is performed silently by the compiler when the casting would not cause any information to be lost (e.g., converting a 16-bit integer to [..]
|
35 |
CastingA “cast” part is one that is made by pouring liquid into a mold.
|
36 |
CastingA corrective action is the formal name for an action taken to correct a design or production process issue that could cause a failure in the field or produce a poor quality product. Corrective actions [..]
|
37 |
CastingThe shape formed by pouring or spraying a plastic or liquid substance into a mold and letting the material harden. Also used to describe the process itself.
|
38 |
CastingA shape made from cast steel. The term casting may also apply to the process of pouring liquid steel into a mold.
|
39 |
CastingThe lump of indigestible fur, bone, and other material that a bird casts up. This is usually called a pellet in owls. Cere
|
40 |
CastingThe process of hiring the actors to play the characters, usually done by a casting director at auditions, with input from director and producer.
|
41 |
CastingA Tissue preparation technique that involves the injecting of Plastic (acrylates) into Blood Vessels or other hollow Viscera and treating the Tissue with a caustic substance. This results in a negativ [..]
|
42 |
CastingCasting is a Forming process used to produce primary and intermediate products (semi-finished products) that can be further processed through forming. A distinction is made between casting in a perman [..]
|
43 |
CastingIn orthotics and prosthetics when a mold or impression of the patient is taken; it is called casting. This cast is taken with fiberglass casting tape or plaster of paris rolls or strips
|
44 |
CastingA casting is a jewelry setting for a gemstone that is formed in a mold. Click here to shop Jewelry Television castings for rings, pendants, earrings, bracelets and more.
|
45 |
Castingger. "casting forth, emitting," s.v. casting vbl. sb. OED. KEY: casting@ger
|
46 |
Castingger 1 castynge 1
|
47 |
CastingA method used by sculptors, it allows them to make copies of their work by using materials such as clay, metal or plastic; placing the material in a mold; and allowing it to harden so that it takes on [..]
|
48 |
CastingCasting is a creative process by which a molten material such as Bronze or plastic is introduced into a mold, allowed to solidify within the mold, and then ejected or broken out to make a fabricated p [..]
|
49 |
CastingThe process of making a sculpture or other object by pouring liquid material such as clay, metal or plastic into
|
50 |
CastingThe technique of pouring a molten metal or liquid material (which will then solidify) into a mould in order to create a sculptural form that may be fabricated as a limited edit
|
51 |
CastingThe process of making an art object by pouring liquid material into a mold. When the material has hardened, the mold is removed. A primary type of casting is the lost wax process.
|
52 |
CastingA method in which molten metal is forced into a mold of rubber or plaster, then cooled into the desired shape.
|
53 |
CastingThe method by which Artists produce Sculptures. Liquid materials such as clay, bronze and plastic are poured into a mold and allowed to cool and harden. The material is transformed into the shape of t [..]
|
54 |
Castingadditive process, indirect method: 1. reproducing a sculptural form: usually refers to pouring liquid plaster, metal or glass into a mould where it hardens, in contrast to pressing a more solid materi [..]
|
55 |
CastingShape or form a subject by pouring a material into a mold while fluid.
|
56 |
Casting
|
57 |
CastingIn this process, liquid material is introduced into a mould and allowed to solidify. Depending on the design and strength of the Mould, this allows for numerous repeated items to be produced.
|
58 |
CastingA form of glass making that entails melting glass and pouring into a mold or melting glass in a mold to form a glass object.
|
59 |
Casting
en|audition
|
60 |
CastingA sculptural process, done by pouring a liquid material into a mold and allowing it to cool or harden. Casting is used to make a replica of an object or to make groups of identical objects. Many mass- [..]
|
<< Cast | Castleman disease >> |