Motion that involves retracting to a safety plane, a linear trajectory in that plane and then plunging from that plane.

Digital Process for Manufacturing.

Defines the end type of a hole as being through hole or blind.

Area where the tool has removed too much material from the workpiece.

Machining in which motion starts from a point inside the domain to machine and follows paths parallel to the domain boundary towards the center of the domain. Compare with outward helical.

Motion that involves retracting to a safety plane, a linear trajectory in that plane and then plunging from that plane.

Milling operation (such as Pocketing or Profile Contouring) that is done in a series of axial cuts.

It is measured normal to the referenced geometry or in a specific direction such as axial or radial. For example, a 5mm Offset on Contour means that a virtual displacement is applied normal to the con [..]

ward helical Machining in which motion starts from a point inside the domain to machine and follows paths parallel to the domain boundary away from the center of the domain. Compare with inward helica [..]

Let's consider the case below. The part is shown in black and the stock in blue. There is a hole with an opening outside the part. Case 1: the tool cannot go through the opening, so we have tw [..]